| Type: | PE Film Blowing Machine |
|---|---|
| Raw Material: | PE |
| Maximum Folding Width of Film: | 600mm |
| Screw Diameter: | 45mm |
| Automation: | Automatic |
| Computerized: | Computerized |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Model :SJ-A 45 |
| Suitable material : HDPE,LDPE,LLDPE |
| Film width:500mm |
| Film thickness:HD(0.005-0.15MM),LD(0.02-0.15MM) |
| Max extrusion output:HD 40KG,LD 50KG |
| Gear case :GB 146 |
| Inverter :15kw delta brand |
| Low-voltage apparatus : Schneider |
| Extruder |
| Screw diameter :45mm |
| Screw L/D :1:30 |
| Screw material:sacm-645/38crmoala |
| Cylinder material :sacm-645/38crmoala |
| Cylinder cooling:180W x2 |
| Feeding device cooling : water circulating |
| Main motor:15kw-4 Siemens brand |
| Temperature control:3zone stainless steel heating coil |
| Average power consume:15kw |
| Heating areas:3zones |
| Drum loader (one time can feed 55kg raw material with auto loader ) |
| Type of die |
| Die size :60mm (Taiwan high speed die head ) |
| Temperature controller :2zone Omron temperature controller |
| Air ring :Dual-lip air ring (Taiwan brand ) |
| Height of air-ring : 150mm |
| Width of air-ring:700mm |
| Air blower :1.5kw (Taiwan brand ) |
| Center steady stick:1P |
| Wind pipe :50mmx 6pcs |
| Take-up unit |
| Electrical controller system |
| Take-up reducer (1:10)+0.75kw motor |
| Take-up unit height:1.6m |
| Knurling roll :90mmx600mm (control by air cylinder ) |
| Pinch roller :165mm x600 mm (control by air cylinder ) |
| Roller width :600mm |
| Effective width:500mm |
| Height adjustable:800mm |
| Take-up speed :10-100m/min |
| Take-up motor:0.75kw |
| Winding unit : |
| Type :surface friction type |
| Single winder |
| Winding motor:0.75kw ,speed controlled by inverter |
| Winding speed :10-100m/min |
| Adjustable rubber roller before winding |
| Effective motor :0.75KW |
| Control system: Turbine reducer +delta inverter |
| Winding roller :Air shaft |
| The electrical control and measuring length display of the pinch and winder should install on the place of winder |
| Temperature controller: Omron |
| Switch box &contractor: Schneider |
| Outline dimension :3x1.5x3.6m |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}